Several steps need to be taken when you are ready to do some Floor Polishing w/ Sanding Adelaide to your existing wood floors. Before you can even begin to sand the floor down to bare wood or use a floor sander, you will need to clean the floor. Once the dust and dirt have been swept away, you will want to start the actual sanding. Sanding the floor removes years of built-up dirt, dust, and grime that get ground into the wood over the years.
After the initial floor sanding, the newly marked sanded areas will be filled with a wood matching stain. Any old timber floorboards and other repair work will also be undertaken at this point. When the old finish is sanded away, it is time to polish the wooden floorboards. The polishing and sealing process always starts with a high bang. Any scratches and damage that were already present when the timber floors were first installed will need to be repaired.
For new wooden floor installations, you will use very fine-grit sandpaper to remove the nicks and scratches, and then the surface is left to dry overnight. During the day, the polish will need to be thoroughly dried before applying new coats of stain. In most cases, the floor can then be sanded well again following the application of a new clear topcoat. Once the floors have been sanded and cleaned, they can then be topped off with a polyurethane layer or a similar coating to protect the floor and prevent it from wearing away.
There are many different techniques used for Floor Polishing w/ Sanding Adelaide to timber floors. Each method comes with its benefits and pitfalls. Fitting a hardwood floor under an air conditioner, for example, has the potential to distort the wood. It means that a professional floor sanding and polishing session may be required to round out any problems. A specialist floor sanding and the polishing company will have the necessary equipment to deal with sanding and refinishing types.
The advantages of having a floor sanding and polishing company include the following. The professionals will know exactly how to handle each scenario, and they won’t cause any damage to the floor. If there is a mistake with the timber floor finishes, the company will rectify it professionally without causing any further damage.
Floor Polishing w/ Sanding Adelaide cannot be done quickly and effectively by a DIY’er, and as a result, it is important to leave the task to the experts. Many homeowners may think that floor sanding and polishing are simple, but it is quite complex. Professionals have all the necessary tools and experience to ensure that they achieve the best results. It will save you a lot of time and possibly money in the long run.